Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Toro
-
Modell:DD-4050
-
Rig Größe:30,001 - 50,000 lbs pullback
Hersteller anzeigen Modelle anzeigen
Zusätzliche Information
-Consistent 40,000 lb of thrust and pullback
-5,000 ft-lb of rotation torque
-Newly designed control system
-Features next generation drill operating system, TDOS-1
Length: 257" (653 cm)
Width: 85" (216 cm)
Height: 86.25" (219)
Weight: 17,460 lbs (7,920 kg) without drill pipe
Engine: Cummins QSB4.5, liquid-cooled, diesel
Gross Power Rating: 160 hp (119 kW)
Rated Engine Speed: 2,300 RPM
Controls:Single or dual joystick
Injection: Direct
Displacement: 272 cu. in. (4.5 L)
Engine Oil Capacity: 11.6 qt (11 L)
Fuel Capacity: 67 gallons (254 L)
Emissions Compliance: Tier 4 Final
Rotarty Speed (Maximum): 225 RPM
Torque: 5,000 ft-lbs (6,101 N-m)
Carriage Travel Speed (Thrust/Pullback): 150 ft/min (46 m/min)
Thrust/Pullback Force: 40,000 lbs (18 Tonnes)
Drill Angle Entry: 16 degrees
Maximum Ground Travel Speed: 3.25 mph (5.2 km/h)
Drill Pipe Length: 10' (305 cm)
Drill Pipe Outside Diameter: 2.375" (61 mm)
PipeTool Joint Outside Diameter: 2.75" (70 mm)
Minimum Bend Radius: 108.2' (33 m)
Pipe Carrying Capacity: 520' (159 m) (52 pieces)
Maximum Flow: 70 gpm (265 L/min)
Maximum Pressure: 1,300 psi (90 Bar)
-5,000 ft-lb of rotation torque
-Newly designed control system
-Features next generation drill operating system, TDOS-1
Length: 257" (653 cm)
Width: 85" (216 cm)
Height: 86.25" (219)
Weight: 17,460 lbs (7,920 kg) without drill pipe
Engine: Cummins QSB4.5, liquid-cooled, diesel
Gross Power Rating: 160 hp (119 kW)
Rated Engine Speed: 2,300 RPM
Controls:Single or dual joystick
Injection: Direct
Displacement: 272 cu. in. (4.5 L)
Engine Oil Capacity: 11.6 qt (11 L)
Fuel Capacity: 67 gallons (254 L)
Emissions Compliance: Tier 4 Final
Rotarty Speed (Maximum): 225 RPM
Torque: 5,000 ft-lbs (6,101 N-m)
Carriage Travel Speed (Thrust/Pullback): 150 ft/min (46 m/min)
Thrust/Pullback Force: 40,000 lbs (18 Tonnes)
Drill Angle Entry: 16 degrees
Maximum Ground Travel Speed: 3.25 mph (5.2 km/h)
Drill Pipe Length: 10' (305 cm)
Drill Pipe Outside Diameter: 2.375" (61 mm)
PipeTool Joint Outside Diameter: 2.75" (70 mm)
Minimum Bend Radius: 108.2' (33 m)
Pipe Carrying Capacity: 520' (159 m) (52 pieces)
Maximum Flow: 70 gpm (265 L/min)
Maximum Pressure: 1,300 psi (90 Bar)
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.