Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Ditch Witch
-
Modell:RT185
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
Angle of approach: 28°
Height, top of cab: 114 in
Height to highest point: 122 in
Length: 165 in
Tractor transport length: 198 in
Wheel base: 105 in
Width 102: in
Tire tread: 81 in
POWER
Engine: John Deere 6068HF275
Fuel: Diesel
Cooling Medium: Liquid
Number of cylinders: 6
Displacement: 414 cubic inches
Bore: 4.2 in
Stroke: 5 in
Gross horsepower @ 2400 rpm: 185 hp
Net operational power @ 2400 rpm: 175 hp
POWER AND DELIVERY SYSTEM
Attachment Pump
Pump displacement: 7.9 cubic inches
Rated pressure: 7,000 psi
Maximum flow rate: 82 gpm
Ground drive pump (variable displacement, axial piston)
Pump displacement: 4.6 cubic inches
Rated pressure: 7,000 psi
Maximum flow rate: 46 gpm
Ground drive motor
Motor displacement: 4.6 cubic inches
Rated pressure: 7,000 psi
Auxiliary pump (gear)
Pump displacement: 1.30 cubic inches
Rated pressure: 3,000 psi
Maximum flow rate: 12.6 gpm
Impeller pump (H1542)
Pump displacement: 1.30 cubic inches
Rated pressure: 3,000 psi
Maximum flow rate: 12.6 gpm
FLUID CAPACITIES
Fuel tank: 75 gal
Engine oil with filter: 26 qt
Engine cooling system: 17 qt
Hydraulic reservoir: 40 gal
Axles
Wheel end: 3.5 qt
Center: 20 qt
BACKFILL BLADE
Type: 6-way hydraulic lift, tilt, swing
Blade width: 95 in
Blade height: 17 in
Blade lift
Above ground: 27 in
Below ground: 7 in
Swing angle, right and left: 20°
Tilt, right and left: 10°
OPERATIONAL
Forward speeds (Trans./Motor)
Low/Low: .9 mph
Low/High: 1.9 mph
High/Low: 6 mph
High/High: 12 mph
Maximum frame tilt right: 7°
Maximum frame tilt left: 7°
Weight: 15,900 lb
Weight (1 row counterweights & BFB): 19,500 lb
Ground clearance at axle center: 18 in
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.