Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Ditch Witch
-
Modell:3610
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
DIMENSIONS
Angle of approach: 20°
Overhang beyond tire: 3.5 in
Height: 86 in
Length - transport: 154 in
Wheelbase: 48 in
Width: 64 in
Tread: 46 in
GENERAL
Ditch Witch model 3610 tractor, 4-wheel drive, rigid frame,
ground drive through rubber tires, conventional two-wheel power steering,
centerline mechanical riding trencher.
OPERATION
Vehicle speeds @ 2500 rpm with 26 x 12.00-12 tires
Maximum transit forward
1st gear 2.3 mph
2nd gear 3.9 mph
3rd gear 7.3 mph
Maximum reverse 1.9 mph
Vehicle clearance circle (wall-to-wall) 27 ft
Operating weight (with shortest boom, 6 in wide
4-pitch chain, and 175 lb operator) 3940 lb
BACKFILL BLADE
Blade width: 64 in
Blade height: 13.9 in
Lift height above ground: 11.6 in
Blade drop below ground: 8 in
Maximum swing angle (left/right): 28°
Tilt angle (up/down): 11°
POWER TRAIN
Ground drive:
Transmission (mechanical) - 3 speeds forward, 1 reverse with gear drive to axles
Ground drive (hydraulic) - Hydraulic drive infinitely variable from zero
to maximum forward and reverse through gear reduction to axles
Clutch: Automotive spring-loaded foot-operated friction drive
Service brake: Disc, foot operated
Parking brake: Disc, hand operated
Tires
26 x 12.00-12 4-ply bar lug, 12 psi (83 kPa)
29 x 12.50-15 4 ply bar lug, 20 psi ( 138 kPa)
Trencher Drive
Transmission - 3 speeds, 1 reverse through shock absorbing clutch
belt drive to right angle drive to head shaft
Clutch - Automotive spring-loaded foot operated friction drive
POWER
Engine: Deutz F3L1011 - Diesel
Cooling medium: Air
Injection: Direct
Number of Cylinders: 3
Displacement: 125 cubic inches
Bore: 3.58 in
Stroke: 4.14 in
Engine manufacturer's gross horsepower rating: 43.5 hp
Max. governed speed as installed (no load): 2650 rpm
Flywheel power (full load): 35 hp
HYDRAULIC SYSTEM
Pump capacity: 9 gpm
Pump relief pressure: 2500 psi
FLUID CAPACITIES
Fuel tank: 13 gal
Engine lubrication oil: 6 qt
Transmission: 3.0 pt
Hydraulic reservoir: 7.7 gal
Hydraulic system: 9 gal
BATTERY
Group 26/26R/70, Res. Cap. 85 min SAE cold crank @ 0° F (-18°C), 700 amp
Angle of approach: 20°
Overhang beyond tire: 3.5 in
Height: 86 in
Length - transport: 154 in
Wheelbase: 48 in
Width: 64 in
Tread: 46 in
GENERAL
Ditch Witch model 3610 tractor, 4-wheel drive, rigid frame,
ground drive through rubber tires, conventional two-wheel power steering,
centerline mechanical riding trencher.
OPERATION
Vehicle speeds @ 2500 rpm with 26 x 12.00-12 tires
Maximum transit forward
1st gear 2.3 mph
2nd gear 3.9 mph
3rd gear 7.3 mph
Maximum reverse 1.9 mph
Vehicle clearance circle (wall-to-wall) 27 ft
Operating weight (with shortest boom, 6 in wide
4-pitch chain, and 175 lb operator) 3940 lb
BACKFILL BLADE
Blade width: 64 in
Blade height: 13.9 in
Lift height above ground: 11.6 in
Blade drop below ground: 8 in
Maximum swing angle (left/right): 28°
Tilt angle (up/down): 11°
POWER TRAIN
Ground drive:
Transmission (mechanical) - 3 speeds forward, 1 reverse with gear drive to axles
Ground drive (hydraulic) - Hydraulic drive infinitely variable from zero
to maximum forward and reverse through gear reduction to axles
Clutch: Automotive spring-loaded foot-operated friction drive
Service brake: Disc, foot operated
Parking brake: Disc, hand operated
Tires
26 x 12.00-12 4-ply bar lug, 12 psi (83 kPa)
29 x 12.50-15 4 ply bar lug, 20 psi ( 138 kPa)
Trencher Drive
Transmission - 3 speeds, 1 reverse through shock absorbing clutch
belt drive to right angle drive to head shaft
Clutch - Automotive spring-loaded foot operated friction drive
POWER
Engine: Deutz F3L1011 - Diesel
Cooling medium: Air
Injection: Direct
Number of Cylinders: 3
Displacement: 125 cubic inches
Bore: 3.58 in
Stroke: 4.14 in
Engine manufacturer's gross horsepower rating: 43.5 hp
Max. governed speed as installed (no load): 2650 rpm
Flywheel power (full load): 35 hp
HYDRAULIC SYSTEM
Pump capacity: 9 gpm
Pump relief pressure: 2500 psi
FLUID CAPACITIES
Fuel tank: 13 gal
Engine lubrication oil: 6 qt
Transmission: 3.0 pt
Hydraulic reservoir: 7.7 gal
Hydraulic system: 9 gal
BATTERY
Group 26/26R/70, Res. Cap. 85 min SAE cold crank @ 0° F (-18°C), 700 amp
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.