Close

• Manufacturer:
  American Augers
• Model:
  DD-110
• Rig Size:
  100,001 - 200,000 lbs pullback

**2013 MODEL SPECIFICATIONS**

Machine Dimensions / Weight
-Length: 30 feet (9.29 m)
-Width: 8 feet (2.43 m)
-Transport Height: 9 feet 6 inches (2.89 m)
-Working Height: 11 feet 4 inches (3.45 m)
-Ground Clearance: 12 inches
-Transport Weight: 41024 pounds (18608 kg)
-Operating Weight: 44246 pounds (20069 kg)

Power Train
-Engine: Cummins QSB 6.7 Diesel
-Rating: 260 hp (164 kW) @ 2200 RPM
-Fuel Capacity: 67 U.S. Gallons (254 liters)
-Hydraulic Capacity 107 U.S. Gallons (405 liters)
-Battery: 2 Deka 908 DMF 12V 1450 CCA, in series to make 24V

Drilling Unit
-Travel System: Self-propelled on Track Crawler Assembly
-Maximum Flat Surface Speed: 2.25 mph (3.62 km/h)
-Drill Angle: Fixed at 15°/27% Grade
-Wrench/Clamp: Open top floating vice grip type
-Weight, Drill Unit: 44246 pounds (20069 kg) with 21 pieces of pipe
-Hold Down System: I-beam stakes manually driven (by excavator); Rear thrust stabilizers resist rearward movement of drill when thrusting

Rotary Drive
-Rotary System: (2) Pinion and gear drive. Infinitely variable.
-Maximum Rotary Torque: 14000 ft-lbs (18981 N-m)
-Maximum Rotary Speed: 150 RPM

Carriage Drive
-Carriage System Rack and pinion, (6) pinion drive with adjustable force limiter
-Maximum Thrust/Pullback: 100000 pounds (45.4 tonnes)
-Maximum Carriage Speed: 100 feet (32.3 m)/minute

Mud Pump
-Onboard Mud Pump: Triplex piston pump with non-electric liner wash
-Output: 200 U.S. Gallons (113.6 liters)/minute @ 1100 psi (75.9 Bar)
-Fluid Course: 2 inches (50 mm)
-Maximum Flow: Up to 250 U.S. Gallons (945 liters)/minute flow

Pipe Loader
-Automated Rod Loader: Uses 20 foot (6.10 m) drill stem. Total pipe capacity on drill is 360 feet (109.7 m); 9 pieces/basket; 2 baskets/machine

Drill Pipe (DD-110)
-Length (each section): 20 feet (6.10 m)
-Outside Tube Diameter:: 3-1/2 inch (89.0 mm)
-Tool Joint Outside Diameter: 4-1/8 inch (105 mm)
-Thread Type: 2-7/8 inch IF Pin x Box
-Water Course: 1-1/2 inch (38.1 mm)
-Weight: 358 pounds (162.39 kg) each

Drill Pipe (DD-110S)
-Length (each section): 15 feet (4.57 m)
-Outside Tube Diameter: 3-1/2 inch (89 mm)
-Tool Joint Outside Diameter: 4-1/8 inch (105 mm)
-Thread Type: 2-7/8 inch IF Pin x Box
-Water Course: 1-3/4 inch (44 mm)
-Weight: 222 pounds (101 kg) each

Protective Equipment
-ZAPALERT system with ground stake
-es!lok Exit Side Lockout System
-Emergency shut down switch on operator’s console and tramming control box

Controls
-Climate Controlled Operator’s Cabin
-Microprocessor Operating Control System
-Remote Tramming Control

Fluid Capacities
-Engine Oil
18.5 quarts (17.5 liters)
SAE 15W-40-CD AA Spec Number 401
-Fuel Tank - Diesel
67 U.S. Gallons (254 liters)
Cetane of 50 or higher
-Gearbox Rotary (American Augers manufactured)
10 quarts (9.46 liters or 9460 CD)
80W-140 AA Spec Number 102
Gearbox Rotary
145 oz. (4.3 liters or 4300 CD)
80W-140 AA Spec Number 102
-Gearbox, Carriage
41 oz. (1.2 liters or 1200 CD)
80W-140 AA Spec Number 102
-Gearbox, Track Drive
67 oz. (2.0 liters or 2000 CD)
SAE-30-CD AA Spec Number 403
-Hydraulic Tank
107 U.S. Gallons (405 liters)
ISO 46 AA Spec Number 202
-Mud Pump
12 quarts (11.36 liters)
ISO 100 AA Spec Number 103
-Radiator
Tier 3 engine: 28 quarts (26.5 liters)
Tier 4i engine: 45 quarts (42.6 liters)
50/50 Ethylene Glycol AA Spec Number 602

Other Information:
Antifreeze: AA Spec Number 602
Grease Points: AA Spec Number 301
Mud Swivel Grease: AA Spec Number 301
Watercourse Antifreeze: AA Spec Number 603

-------------------------------------

**2015 MODEL SPECIFICATIONS**

Power Train (requires 2 power packs for optimal performance)
-Engine Cummins QS5B6.7 Tier 4 final (or Tier 3 depending on country of purchase)
-Rating 260 hp (164 kW) @ 2200 RPM
-Fuel Capacity 81 U.S. gallons (306 L)
-Hydraulic Capacity 107 U.S. gallons (405 L)
-Battery (2) Deka 908DME, 12V, 1450 CCA-24 V System

Carriage System
-Rack & Pinion (4) Pinion drive with adjustable force limiter
-Max. Thrust/Pullback 110,000 lbs. (50 tonnes)
-Max. Carriage Speed 170 ft. (52 m) / minute
-Carriage Motor (4) Radial piston / dual displacement
-Carriage Brakes (2) Spring applied / hydraulic release
-Gearbox (4) Planetary gearboxes

Rotary Drive
(1) Pinion and gear drive with infinitely variable torque
-Max. Rotary Torque 15,000 ft. lbs. (20,337 Nm)
-Max. Rotary Speed 150 rpm
-Rotary Motor (1) Radial piston variable displacement
-Rotary Brakes (1) Spring applied / hydraulic release
-Rotary Gearbox (1) Planetary drive
-Fluid Course 2 in. (50 mm)
-Max. Flow 250 U.S. gallons (945 L) / minutes
-Max. Pressure 1,500 psi (103 bar)
-Side-Entry Sub 2 7⁄8 in. (73 mm) IF
-Slip Spindle 2 7⁄8 in. (73 mm) IF
-Misc. Wireline commutator, slip ring, Wiggle Steer, adjustable torque limiter, digital tachometer

Weights & Dimensions - DRILL
-Length 35 ft. 7 in. (10.84 m)
-Height 9 ft. 10 in. (3 m)
-Track Width 8 ft. 2 in. (2.5 m)
-Width 8 ft. 2 in. (2.5 m

Drill Rig Weight
-Accessory Crate 1,300 lb. (590 kg)
-Transport 42,000 lb. (19,051 kg), no pipe baskets
-Working (1) Pipe basket (9) pieces of drill pipe & (3) pieces of drill pipe from staging area: 47,000 lbs. (21,319 kg)
-Drill Pipe Weight 358 lbs. (162.4 kg) each

Wrench (Open-Top Style)
-Max. Breakout Torque 32,000 ft. lbs. (43,390 Nm)
-Max. Makeup Torque 26,000 ft. lbs. (35,250 Nm)
-Clamp/Grip Range 2-7/8 in. - 4-1/8 in. (73-105 mm)

Drill Rig & Pipe
-Drill Angle 10-18°
-Drill Pipe 20 ft. (6 m) or 15 ft. (4.5 m)
-Cabin on-board, articulated
-Max. Pipe Basket Capacity (9) Pieces of drill pipe
-Max. On-Board Baskets WORKING: 2
-Max. On-Board Baskets TRANSPORT: 1
-(3) Pieces drill pipe in on-board staging area

Miscellaneous
-Outside Tube Diam. 3-1/2 in. (89 mm)
-Tool Joint Outside Diam. 4-1/8 in. (105 mm)
-Thread Type - 2-7/8 in. (73 mm) IF pin x box
-Fluid Course - 1-3/4 in. (44.5 mm)
-Pump - Triplex piston pump
-Max. Flow 200 U.S. gallons (757 L) / minute
-Max. Pressure 1,100 psi (75.8 bar)

Travel System
-Self-propelled, Wireless control
-Travel Speed 2.25 mph (3.62 kph) forward & reverse
-Ground Bearing Pressure 12 psi (.83 bar)

Operational Features
-Work Lights (5) 24 volt
-Engine shutdown switch at operator’s console
-es!Lok Exit side lockout system
-ZAPALERT Electrical detection device